Adventure Forums - View Single Post

sebekm · 09-05-2008, 06:14 AM

A few weeks ago I tried installing and running GF on my new (one year old) system (MPC ClientPro 385 /w Intel Core2 Duo processor-2.40GHZ, 4MB cache, 1066 FSB; 4GB RAM, 160GB HDD (2x80 w/RAID controller); ATI Radeon X1650PRO 512 MB PCIE video card; Creative Soundblaster Audigy SE sound card; running Windows XP Pro w/SP3). Initially, I couldn't install the game from the CDs I purchased way back when. When that problem was solved, the game wouldn't run without freezing up after about five minutes or so (video freeze/audio stuttering). I eventually solved these problems and just finished running the game from start to finish with no problems whatsoever. Since my solutions were a combination of suggestions found by searching the internet and my own trial and error, I thought I'd post what worked for me - as it seems that lots of folks are discovering this game and trying to play it on their newer systems.
1. The solution to the install problem was to download and install the Grim Fandango replacement setup and installer program from:
http://quick.mixnmojo.com/grim-fandango-setup
Once this program was installed, I was able to install the entire game on my hard drive with no problems.
2. When I tried to run the game, I encountered the above described freezes and audio stuttering. I found that setting the game's properties in Win XP's compatibility mode to: "Windows NT 4.0 (Service Pack 5)," and then setting the game's 3d Hardware Acceleration to "OFF" through the game's Options Menu provided the best results - although the freezes/stuttering continued. (Note: I tried running the game in both Windows 95 and Windows 98/ Windows ME compatibility modes, but both of these settings produced an inferior "scratchy" audio, and degraded video.)
3. More internet searching led me to a web page titled "Game Issues with Multiproccessor/ Hyperthreading Systems" at:
http://www16.brinkster.com/salvage/thief/darkengine.htm
I followed the instructions on this page for the "permanent way" to fix the problem (the temporary fix didn't work for me). This consisted of downloading imagecfg and unzipping it to the two folders specified; creating processor.bat per the instructions; saving processor.bat to the game directory; copying a backup of grimfandango.exe to a different directory (just in case); and then modifying grimfandango.exe in the game directory with processor.bat. Once I did this the game ran like a charm - no hangs, no problems with any of the puzzles (although the elevator puzzle and the crane/chain puzzle were a bit "twitchy" - just the same as when I ran the game on my older systems). But the graphics, sound, and everything else was spectacular. I've kept the compatibility mode set to "Windows NT 4.0 (Service Pack 5)," and the hardware acceleration set to "OFF" in the game's Options Menu.

Hope this information helps anybody having problems running the game on their XP system. Good luck!

09-05-2008, 06:14 AM	#6
sebekm Junior Member Join Date: Jan 2008 Posts: 4	GF/XP Problem Solved A few weeks ago I tried installing and running GF on my new (one year old) system (MPC ClientPro 385 /w Intel Core2 Duo processor-2.40GHZ, 4MB cache, 1066 FSB; 4GB RAM, 160GB HDD (2x80 w/RAID controller); ATI Radeon X1650PRO 512 MB PCIE video card; Creative Soundblaster Audigy SE sound card; running Windows XP Pro w/SP3). Initially, I couldn't install the game from the CDs I purchased way back when. When that problem was solved, the game wouldn't run without freezing up after about five minutes or so (video freeze/audio stuttering). I eventually solved these problems and just finished running the game from start to finish with no problems whatsoever. Since my solutions were a combination of suggestions found by searching the internet and my own trial and error, I thought I'd post what worked for me - as it seems that lots of folks are discovering this game and trying to play it on their newer systems. 1. The solution to the install problem was to download and install the Grim Fandango replacement setup and installer program from: http://quick.mixnmojo.com/grim-fandango-setup Once this program was installed, I was able to install the entire game on my hard drive with no problems. 2. When I tried to run the game, I encountered the above described freezes and audio stuttering. I found that setting the game's properties in Win XP's compatibility mode to: "Windows NT 4.0 (Service Pack 5)," and then setting the game's 3d Hardware Acceleration to "OFF" through the game's Options Menu provided the best results - although the freezes/stuttering continued. (Note: I tried running the game in both Windows 95 and Windows 98/ Windows ME compatibility modes, but both of these settings produced an inferior "scratchy" audio, and degraded video.) 3. More internet searching led me to a web page titled "Game Issues with Multiproccessor/ Hyperthreading Systems" at: http://www16.brinkster.com/salvage/thief/darkengine.htm I followed the instructions on this page for the "permanent way" to fix the problem (the temporary fix didn't work for me). This consisted of downloading imagecfg and unzipping it to the two folders specified; creating processor.bat per the instructions; saving processor.bat to the game directory; copying a backup of grimfandango.exe to a different directory (just in case); and then modifying grimfandango.exe in the game directory with processor.bat. Once I did this the game ran like a charm - no hangs, no problems with any of the puzzles (although the elevator puzzle and the crane/chain puzzle were a bit "twitchy" - just the same as when I ran the game on my older systems). But the graphics, sound, and everything else was spectacular. I've kept the compatibility mode set to "Windows NT 4.0 (Service Pack 5)," and the hardware acceleration set to "OFF" in the game's Options Menu. Hope this information helps anybody having problems running the game on their XP system. Good luck!